sustainable wholesale jewelry How to clean your own cleaning ring after the ring is dirty

tam's wholesale jewelry dublin ca How to clean the ring? Many people will encounter this problem. Below, we have compiled the cleaning method of the ring dirty ring. Let ’s take a look! I hope it can help you.
Mo to clean the ring
1. Cold water immersion method
In Asumonia water used in half a cup of family, add the same capacity of clear water, immerse the diamond in the solution for about thirty minutes Then use the small wipe to gently wash the inlaid metal around the diamond jewelry, and then put it in the solution gently. Take it out and wash it with the water without rinse.
. The warm water immersion method
(1). Add a mild cleaner to warm water and soak the diamond ring.
(2). If necessary, use a soft brush to remove dust.
(3). Put the ring in a mixed solution and clean it, and then rinse it thoroughly under the flowing warm water. When rinse, remember to block the drain or place the diamond in the filter to avoid loss.
(4). Use a cotton soft cloth to dry the diamond ring.

3. Use soapy water
The first step: make a solution with soap and water. Squeeze some detergent in the bowl, then pour warm water to stir the solution to make some foam. Softening, it is best to be a natural cleaning agent, so as to avoid the chemical component damage ring of detergent. You can also use soft handwashing, fragrance, or shower gel. Make sure not to use soap containing "moisturizers", or you may leave a layer of film on the ring.
Step 2: Put the ring in a bowl for 15 minutes. Let soap and water soak the ring. The soapy water will penetrate and disintegrate the gray, dust, and stains on the ring.
3: Take out the ring to check. If you can still see stains, you need to clean it further. Conversely, you can wash the ring with water.
The fourth step: gently brush off the dust on the ring with a soft toothbrush. Be sure to use a soft brush brush instead of medium hardness or hard brush so that there will be no scratches on your ring. Gently brush, clean the dust in the gap with a brush. If necessary, you can use a toothpick to help clean up the dust in the gap.
: Wash the ring with cold water.
Step 6: dry the ring. Put the ring on a paper towel or clean cloth to completely dry it.
It is how to clean the ring if it is dirty, do you know?