wholesale jewelry miami fl How to pack a round gift box (detailed explanation of three methods and text)

faux designer jewelry wholesale

The packaging gifts may be very interesting, but when you packaged objects with strange shapes (especially round objects), packaging gifts will become difficult. They have no edges, so it is difficult to know where to fold your paper without wrinkle or make the current appearance awkward and bulky. However, by performing some strategic folding and cutting, you can wrap the ball or cylindrical body like a professional golf!
The wrapping packaging spherical gift
1. Cut a piece of long packaging paper. The length of the packaging paper you need should be longer than the width, but the width should be enough to completely cover the gift. When the gift is in the center of the paper, you should leave at least a few inches of paper on both sides.
The exact size of the paper depends on the size of the gift. However, it is better to be cautious, because you can always cut off excess paper at the end.

2. Sliding the bowl under the packaging paper, and then put the gift on it. Putting the gift on a bowl or large roll tape can make it stand up, making it easier to pack. After sliding the bowl to the bottom, put your gift on it and slide it to make it in the center of the paper.
The short side should be on the left and right sides of the gift, and the long side should be before and after the gift.
Please use a small bowl or tape roll to prevent the object from slipping.

3. Pull the packaging paper to the top of the object. Open the gift with one hand, pull the long side of the packaging paper to yourself, bend it and bend upwards. Make sure it reaches the center of the gift, and then make the extra paper protruding to the side.

4. Write the wroan and cover the ball. Use one hand to lean the edge of the packaging paper on the top of the gift. Start collecting the remaining paper with another piece of paper, and then gently fold it to the top. When you move around the gift, please collect the paper with one hand.
It you can turn the crease or smaller according to the size of the gift and the desired appearance.
Is when you reach the other side of the ball, please switch your hand so that your hand is closer to the unwanted paper folding.

5. Tie the excess paper on the top with a ribbon. After collecting all the packaging paper to the top, bundle it with a ribbon. You can also paste some tape to make it more secure. Then, cut the excess package on the top into a few inches long, or the best package.
before starting the winding, please cut the tape, so that you don't have to hold the paper and cut the ribbon at the same time.

This gift paper
1. Put the object in the center of the packaging paper. Cut the paper and measure it to ensure the entire gift. Then, place the gift in the middle, so that the long side is in front and behind, and the short side is on the side.
Tips: For this method, just pretend that you want to pack the box. The packaging will be slightly loose, but you can complete the packaging faster and easier.

2. Fold the long side of the paper on the object, and then fix it with a tape. Grasp the long side of your long side, pull it to the top of the gift, and then perform the same operation of the other long side. Make sure they overlap and have no gap. Then, the 1-4-inch (2.5-10.2 cm) tape is fixed in place.
If your gift is larger, you may need a larger tape and even some separate tape. Use your best judgment to see which method is most effective.

3. Make a triangular fold at the end of the gift. Pull the packaging paper on one of the openings to make it flat with the gift. Then, pull out one side to form a triangular folding to the center. Repeat this step at another until you extend a pointed fabric wings.
The side wings as much as possible to make the packaging neat.

4. Pull up the bottom flip and fix it in place. Continue to lean the side wings tightly in the middle. Then, remove the bottom and press the gift. Use a small piece of tape to fix it in place.

5. Repeat the other end of the gift. The same fixation, folding and stagnation steps are performed on the other side of the gift to complete the packaging work. Gently pull out all the wrinkles at the corner to make the overall appearance more neat.

Packing cylindrical gifts
1. Put the drum in the middle of the packaging paper. Place the gift at a place near the edge, so that if you bend the flat ends of the paper object, it will be in the middle. Make sure that the paper is long enough to fully wrap the gift, at least 1 inch (2.5 cm).
The flat ends of the gift should face the long side of the paper.
This: This method is suitable for tall, cylindrical gifts and flat round gifts.
2. Roll up the short end of the paper and stick to the gift with tape. Take one of the short end and pull it up and cross the bending side of the cylindrical body. When the other end is the same, fix it in place. Then, fix it in an appropriate position with a tape until the overlap.
In order to make the appearance more neat, you can use double -sided tape. Before pulling the paper on the gift, put it on the lower side of the edge of the paper, then roll up the paper and flatten the tape.
3. Bend the edge of the top to a flat end of the gift. Make sure that the gift is still in the middle of the paper tube, and carefully folds the top of the paper on a flat side. Neat creases and make it as close as possible.
4. Fold the diagonal triangle creases towards the center. The top of the fixed paper. Then, pinch the paper slightly on one side, and then gently pull it in. Form a sharp corner crease, which points to the center of the flat round end.
5. Make a second overlap against diagonal crease. Squeeze a little scattered paper next to the creases you just made, and then perform the same operation. Overlap with the diagonal, fold the diagonal.
This with one hand firmly fix the two creases in the appropriate position.
6. Repeat all creases around the flat end. Continue to form overlapping creases on the flat end of the gift, and finally move to the lower half of the paper. Make them as tight as possible so that they are kept in place when you move gifts. When all the creases are completed, it looks like the spiral of the gift flat.
It you can carry gifts with you to fold it.
7. Fix the center of the tape. After completing all the creases, take a small tape and place it in the center of the flat end pointed by all creases. Repeat the above steps on the second flat end of the cylindrical body to complete the parcel
. If you want to hide the center of the crease, please knot or paste the bow on it.